Difference between revisions of "KinKal"

Revision as of 16:29, 14 July 2023

Local KinKal development with Muse

Initial build

To develop new code in KinKal for new use cases in Offline you will need to checkout KinKal and install it in your own private extension to UPS. You need to do some initial setup in a throwaway shell:

create a Muse workDir and cd there
setup Muse. This puts a root and other products in the environment, which the KinKal build will use

mkdir 'myworkdir'
cd 'myworkdir'

checkout your fork of Offline in the muse workdir as you would normally. Add the main mu2e repo as a remote. If you need other muse-aware repos (Production, TrkAna, ...) for your workflow, you can add them too

git clone git@github.com:<your GitHub username>/Offline
cd Offline
git remote add -f mu2e https://github.com/Mu2e/Offline
git checkout -b work_branch mu2e/master
cd ..
(git clone git@github.com:<your GitHub username>/TrkAna.git)

create a fork of KinKal in GitHub (if you don't already have one). In a browser, go to the KinKal GitHub page, then under the 'fork' menu select 'Create a new fork'. You must be logged in to your GitHub account.
checkout your fork of KinKal in the muse workdir .The KinKal development model is the same as Offline: start with the head of main, create your own branch, develop and commit to that, and make a PR to KinKal when your development is ready. Start with the current version of KinKal

git clone git@github.com:<your GitHub username>/KinKal
cd KinKal
git remote add -f mu2e https://github.com/KFTrack/KinKal
git checkout -b work_branch mu2e/$KINKAL_VERSION
cd ..

build KinKal according to the instructions in README. You can build either a profile (optimized)

or debug. If you want both, just repeat this step. mkdir build_profile (or build_debug) cd build_profile (or build_debug) cmake ../KinKal -DCMAKE_BUILD_TYPE=Release (or Debug) make -j 20 make test cd ..

checkout KinKal_to_UPS, and use it to make your build of KinKal visible to Offline through UPS.

git clone https://github.com/Mu2e/KinKal_to_UPS
mkdir artexternals
rsync -aur /cvmfs/mu2e.opensciencegrid.org/artexternals/.upsfiles artexternals/

install your build of KinKal in artexternals. You must assign a tag to your build; the value is arbitrary, but it shouldn't correspond to an actual tag. Below a dummy is used.

KinKal_to_UPS/build -v v9.9.9 -i -d artexternals

create an envset that points to your local UPS version of KinKal. Start with a copy of the current Offline envset.
edit the copy so that it references your local version of KinKal. IE replace the tag in the line 'setup -B KinKal v00_01_06 -q +${MUSE_BUILD}:+${MUSE_COMPILER_E}:+${MUSE_PYTHON}' with your tag (v09_09_09)

mkdir muse
cp $MUSE_ENVSET_DIR/$MUSE_ENVSET muse/u999
vim muse/u999
...

At this point, KinKal is built and UPS-installed locally, but the current setup of Offline still points to the old version of KinKal. To get Offline to use your new version of KinKal you need a new shell. Close your existing shell, and start a new one, then cd back to your work directory. Note you only need to do this when setting up a new work directory; the following commands are needed for all subsequent use of this workdir

close your current shell
create a new shell, and cd to your muse workdir.
Tell UPS where to look find your local version of KinKal
setup muse, specifying the envset you created, which points to your local KinKal installation

exit (closes the current shell)
ssh 'myuser'@mu2egpvm04.fnal.gov
cd 'myworkdir'
setup mu2e
export PRODUCTS=${PWD}/artexternals:${PRODUCTS}
muse setup -q u999

Now build Offline (and any other muse-aware repos you've cloned)

muse build -j 20

Rebuilding KinKal

Once you have a stock build of Offline and KinKal, you can can develop both code sets coherently.

edit KinKal as needed
edit Offline as needed to exploit new KinKal features
rebuild KinKal and update the installation
rebuild Offline

(edit KinKal/*/*)
(edit Offline/*/*)
cd build_profile
make -j 20
make test
cd ..
KinKal_to_UPS/build -v v9.9.9 -i -d artexternals
muse build

Returning to the area

to return in a new shell and simply run the code you've already edited and built, you only need to repeat the setups:

cd 'workdir'
setup mu2e
export PRODUCTS=${PWD}/artexternals:${PRODUCTS}
muse setup -q u999

Adding debug build

An environment can only be setup once, so for an process, you must choose one or the other. The steps all follow form the prof build

setups. Setup muse in debug. Since you don't have the new KinKal in debug, you can setup root by setting up the published versions

setup mu2e
cd 'workdir'
muse setup -q debug

build debug KinKal using the same fake version as for prof

mkdir build_debug
cd build_debug
cmake ../KinKal  -DCMAKE_BUILD_TYPE=Debug
make -j 20
make test
cd ..
KinKal_to_UPS/build -v v9.9.9 -i -d artexternals

now that the debug version of the local KinKal product is available, you need to setup in a new shell to get the full environment

exit
ssh 'myuser@mu2egpvm04.fnal.gov'
cd 'workdir'
setup mu2e
export PRODUCTS=${PWD}/artexternals:${PRODUCTS}
muse setup -q u999:debug
muse build

What if you update Offline?

If you update the version of Offline in your working area:

Compare the old and new versions of Offline to see if the version or qualifiers of root have changed.
If they have not, you are done with this section. If they have, then you need to do the following:
Make a new build of KinKal using the modified root and install it in your local artexternals directory.
1. Hint: you may wish to investigate the -s versionSuffix option in KinKal_to_UPS.
2. Hint: remember to start a new login session
Follow the instructions in Muse#Maintaining_a_Customized_Setup to update your local muse/uNNN file to select your new build of KinKal.

Original Notes

To develop new code in KinKal and call it in Offline you will need to define your own version of KinKal and install it in your own private extension to UPS. You need to do some initial setup in a throwaway shell:

create a Muse workDir and cd there
checkout your fork of Offline in the muse workdir as you would normally
checkout your fork of KinKal in the muse workdir .The KinKal development model is the same as Offline: start with the head of main, create your own branch, develop and commit to that, and make a PR to KinKal when your development is ready.
checkout tag v0.1.4 of KinKal_to_UPS

build KinKal according to the instructions in README. make sure to run the test (make test)

create the directory 'artexternals' in the muse workdir
execute 'muse setup -q (prof, debug) depending on what you want. Note you can have both builds in the same workdir, but any given shell can be only one or the other.
invoke KinKal_to_UPS/build -v your_version -i -b -j10, where your_version is whatever version you want (it is temporary). I have this command saved in a script /mu2e/app/users/brownd/KFTrack/install_KinKal.sh
define a user envset in the ./muse directory. mine is /mu2e/app/users/brownd/KFTrack/muse/u002 The name is unimportant. Edit that so it refers to your_version of KinKal

Then, close that shell. From then on, you can work with KinKal and/or Offline in this muse workdir with the following commands:

create a new shell, and cd to your muse workdir
exectue 'export PRODUCTS=${PWD}/artexternals:${PRODUCTS}' This tells UPS to look for KinKal in your local install
execute 'muse setup -q (prof, debug) your_envset'

(I have these defined as /mu2e/app/users/brownd/KFTrack/setup_prof.sh and setup_debug.sh in my area)'

Any time you change KinKal rebuild and rerun the tests, and then rerun install_KinKal.sh
Any time you change Mu2eKinKal (or after changing and rebuilding KinKal as above) rebuild Offline using 'muse build'