MDC2020
Introduction
MDC2020 is an end-to-end production using updated geometry, detector simulations, persistent schema, and simulation workflows compared to MDC2018. The goal is to provide a reasonably complete and accurate model of what Mu2e will record during commissioning and first running period ('Run 1', add reference), including OnSpill, OffSpill, and Extracted Position samples. The primary intended use case of these samples are:
- Detector calibration and alignment, including cross-system (ie CRV to Calo) calibrations
- Detector commissioning
- Trigger algorithm testing and development
- TDAQ to Offline data transfer workflows
- Offline reconstruction algorithm development
- Science extraction framework and algorithm development
The samples have been produced using POMS.
Detector Geometry
The detector geometry and material configuration used in MDC2020 is documented in X (add reference). A brief description of the major features is included below.
Detector Response Simulation
The detector response simulations used for MDC2020 include detailed models of the micro-physics (below the level of the Geant4 energy deposition), and the translation of those processes into digital signals. Details are described in the notes referenced in the table below. Note that a detailed model of the timing distribution system is also part of the digitization model.
Simulation Workflow
Cosmic Simulation POMS campaign
Beam Simulation POMS campaign
Digitization and mixing POMS campaign
Job Management
Validation
Currently the only MDC2020 data are Validation datasets, ~1% samples used to test outputs and subsequent stages. These are engineering samples only, not intended for physics use, just to make sure content is complete. All files are in: /pnfs/mu2e/persistent/users/brownd/MDC2020Val
| File | Description |
| dts.brownd.BeamFlashcat.MDC2020d.001202_00.art | concatenated beam flash DetectorSteps |
| dts.brownd.NeutralsFlashcat.MDC2020d.001202_00.art | concatenated neutrals flash DetectorSteps |
| sim.brownd.Beamcat.MDC2020d.001201_01.art | concatenated beam particles |
| sim.brownd.Neutralscat.MDC2020d.001201_01.art | concatenated neutral particles |
| sim.brownd.TargetStops.MDC2020d.001202_00.art | concatenated muon target stops |
| TrkAna_CeEndpointMix.root | TrkAna TTrees from the CeEndpointMix reco output |
| CeEndpointMixReco.txt | list of reconstructed Conversion endpoint electrons |
| CeEndpointMix.txt | list of conversion endpoint electron digis |
| CeEndpoint.txt | list of conversion endpoint electrons |
| NoPrimaryTest.txt | list of background events with no primary particle |
| BeamFlash_val.root | Validation histograms from beam flash |
| Beam_val.root | Validation histograms from beam particles |
| CeEndpointMixReco_val.root | Validation histograms from reconstructed conversion endpoint electrons |
| CeEndpointMix_val.root | Validation histograms from conversion endpoint electron digis |
| CeEndpoint_val.root | Validation histograms from conversion endpoint electrons |
| NeutralsFlash_val.root | Validation histograms from neutral flash |
| Neutrals_val.root | Validation histograms from neutral particles |
| NoPrimary_val.root | Validation histograms from background events with no primary particle |
| TargetStops_val.root | Validation histograms from muon target stops |
| BeamResampler_expand.fcl | Expanded fcl from beam resampler job |
| CeEndpoint_expand.fcl | Expanded fcl from conversion endpoint job |
| CeEndpointMix_expand.fcl | Expanded fcl from conversion endpoint mixing job |
| CeEndpointMixReco_expand.fcl | Expanded fcl from conversion endpoint reconstruction job |
| NeutralsResampler_expand.fcl | Expanded fcl from neutral resampler job |
| NoPrimary_expand.fcl | Expanded fcl from no-primary background mixing job |
| POT_expand.fcl | Expanded fcl from protons on target job |